|CAS #: 74-99-7|
| UN #: 1954
|EC Number: 200-828-4
|ACUTE HAZARDS||PREVENTION||FIRE FIGHTING|
|FIRE & EXPLOSION||Extremely flammable. Gas/air mixtures are explosive.||NO open flames, NO sparks and NO smoking. Closed system, ventilation, explosion-proof electrical equipment and lighting. Prevent build-up of electrostatic charges (e.g., by grounding) if in liquid state. Use non-sparking handtools. Prevent build-up of electrostatic charges (e.g., by grounding).||Shut off supply; if not possible and no risk to surroundings, let the fire burn itself out. In other cases extinguish with water spray. In case of fire: keep cylinder cool by spraying with water. Combat fire from a sheltered position.|
|Inhalation||Dizziness. Headache. Nausea. Unconsciousness.||Use local exhaust or breathing protection.||Fresh air, rest. Artificial respiration may be needed. Refer for medical attention. See Notes.|
|Skin||ON CONTACT WITH LIQUID: FROSTBITE.||Cold-insulating gloves.||ON FROSTBITE: rinse with plenty of water, do NOT remove clothes.|
|Eyes||Wear face shield.||First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.|
|SPILLAGE DISPOSAL||CLASSIFICATION & LABELLING|
|Evacuate danger area! Personal protection: chemical protection suit including self-contained breathing apparatus. Ventilation. Remove all ignition sources. NEVER direct water jet on liquid.||
According to UN GHS Criteria
|PHYSICAL & CHEMICAL INFORMATION|
Physical State; Appearance
Formula: C3H4 / CH3-C=CH
|EXPOSURE & HEALTH EFFECTS|
Routes of exposure
Effects of short-term exposure
Effects of long-term or repeated exposure
|OCCUPATIONAL EXPOSURE LIMITS|
|TLV: 1000 ppm as TWA|
|High concentrations in the air cause a deficiency of oxygen with the risk of unconsciousness or death.
Check oxygen content before entering area.
After use for welding, turn valve off; regularly check tubing, etc., and test for leaks with soap and water.
The measures mentioned in section PREVENTION are applicable to production, filling of cylinders, and storage of the gas.
|All rights reserved. The published material is being distributed without warranty of any kind, either expressed or implied. Neither ILO nor WHO nor the European Commission shall be responsible for the interpretation and use of the information contained in this material.|