Cranes - 4 entradas encontradas

Sus criterios de búsqueda son

• País / Organización: Países Bajos
• Cranes

1991

CIS 92-1782 Cranes - Inspection and tests [Netherlands]
Hijskranen - Onderzoekingen en beproevingen [en holandés]
According to legal provisions, cranes with a safe working load of 2t and above have to be examined and tested for reliabiity and safe operation. These tests have to be carried out by an expert, both before their initial use and periodically thereafter. This directive contains information about the testing procedures to be followed.
Labour Inspectorate, Directorate-General of Labour (Arbeidsinspectie, Directoraat-Generaal van de Arbeid), Postbus 90804, 2509 LV Den Haag, Netherlands, 5th ed., 1991. 27p.

1989

CIS 91-1084 Cranes: inspection and tests [Netherlands]
Hijskranen: onderzoekingen en beproevingen [en holandés]
Under article 141 of the Safety Decree for Factories and Workshops 1938 (V.B.F.), cranes with a safe working load of two tons and above have to be examined and tested for reliability and safe operation. These tests have to be carried out by an expert, before first use and periodically. This directive (revision of CIS 85-307) contains information about the safety rules required by law.
Labour Inspectorate, Directorate-General of Labour (Arbeidsinspectie, Directoraat-Generaal van de Arbeid), Postbus 69, 2270 MA Voorburg, Netherlands, 4th ed., 1989. 18p.

1984

CIS 85-307
(Arbeidsinspectie)
Cranes - Examinations and tests
Hijskranen - Onderzoekingen en beproevingen [en holandés]
Contents of this directive: definitions; scope; examination and testing; experts; logbooks for recording of results; obligations of owners; application and coordination of official regulations; reproductions of applicable sections of the law; summary of relevant Dutch standards.
Directoraat-Generaal van de Arbeid, Postbus 69, 2270 MA Voorburg, Netherlands, 1984. 12p. Price: Glds.0.50.

1976

CIS 77-908 Safety rules for cranes
Veiligheidsregels voor hijskraanen [en holandés]
This circular informs all manufacturers concerned that, with effect from 1 Apr. 1977, all calculations of static and dynamic loads in cranes in the Netherlands are to be assessed exclusively on the basis of Dutch standards NEN 2018 (Cranes - Loads and combinations of loads) and NEN 2019 (Cranes - The metal structure). As regards travel limiting and stop devices actuated in the event of failure, crane makers should comply with the rules laid down in standard NEN 2023 (Cranes - Design requirements relating to safety) (CIS 74-1202). V-belt transmissions may not be used in crane lifting gear.
Informatiebulletin 76-2, Inspectorate of Labour, Directorate General of Labour (Arbeidsinspectie, Directoraat-Generaal van de Arbeid), Voorburg, Netherlands, Oct. 1976. 3p.