Welding and cutting - 5 entradas encontradas
Sus criterios de búsqueda son
- País / Organización: Suecia
- Welding and cutting
1993
CIS 96-1204
Ruido de los compresores y los grupos electrógenos de soldadura y de energía [Suecia]
Buller från kompressorer, svetsgeneratorer och kraftgeneratorer [en sueco]
Este Reglamento, adoptado el 21 de septiembre de 1993, transpone en la legislación sueca, las Directiva 84/5r34/CEE (CIS 95-1195), 85/406/CEE, 84/535/CEE (CIS 95-1197), 85/407/CEE, 84/536/CEE (CIS 95-1198), 85/408/CEE, 84/532/CEE, 79/113/CEE (CIS 95-1193) y 81/1051/CEE (CIS 95-1194). Puntos tratados: aplicación y definiciones; condiciones de comercialización; homologación de tipo; límites sonoros de exposición; declaración de conformidad; marcado; disposiciones especiales; recomendaciones para la aplicación del Reglamento. Anexos 1 al 5: formularios estándar para la homologación de tipo; método de determinación del nivel sonoro; método de dosimetría del aire de los compresores; formulario tipo para la certificación del nivel sonoro; formulario tipo para la declaración de conformidad respecto al ruido; ejemplo de pictograma para los niveles sonoros.
Arbetarskyddsstyrelsen, Publikationsservice, Box 1300, 171 25 Solna, Suecia, 1993. 36p. Ilus.
1992
CIS 94-1462
Arbetarskyddsstyrelsen (National Board of Occupational Safety and Health)
Welding and thermal cutting [Sweden]
Smältsvetsning och termisk skärning [en sueco]
This directive replaces AFS 1989:1 (CIS 90-1421). The basic requirement is that work involving gas/arc welding and cutting must be planned and conducted in such a way as to minimize exposure to welding fumes. Contents: requirements for gas cylinders and pipes; marking of hazardous electrodes and welding flux; ventilation; personal protective equipment; health risks and safe working practices. Detailed commentary. In annex: checklist for safe welding and cutting. Detailed commentaries are appended.
Publikationsservice, Box 1300, 171 25 Solna, Sweden, 1992. 30p. Illus.
1989
CIS 90-1421
Arbetarskyddsstyrelsen
Welding and thermal cutting [Sweden]
Smältsvetsning och termisk skärning [en sueco]
This ordinance (effective 1 January 1990) applies to welding and thermal cutting of metals (the rules on marking will enter into force 1 January 1991). The basic stipulations are that this type of work must be planned and conducted in such a way as to minimise exposure to welding fumes. Contents: gas cylinders and pipes, marking of hazardous electrodes and welding flux, workplace monitoring, personal protective equipment and special provisions. Detailed commentaries are appended.
LiberDistribution, 162 89 Stockholm, Sweden, 11 May 1989. 30p.
1977
CIS 77-1709
Plasma arc cutting
Plasmaskärning [en sueco]
These directives (entry into force: 1 Apr. 1977) prescribe measures to safeguard the health of workers using plasma arc torches: local exhaust ventilation, remote control of torch if operating current exceeds 30kW, separate cutting rooms or partitioning around plasma arc cutting units, use of filter glasses (table of absorption factors adapted to current used), wearing of contact lenses prohibited (risk of adhering to cornea due to infrared radiation), hand and face protection against heat, overalls closed at neck and wrists to be worn, single control for shutting off gas and electric current simultaneously on hand-held cutting torches, noise control.
Meddelanden 1977:3, National Board of Occupational Safety and Health (Arbetarskyddsstyrelsen), Fack, 10026 Stockholm 34, Sweden, 22 Feb. 1977. 3p. Gratis.
1975
CIS 76-513
Anvisningar nr. 19:5, National Board of Occupational Safety and Health (Kungliga Arbetarskyddsstyrelsen), Stockholm, Feb. 1975.
Flame cutting, etc. - Directives for shipyards
Gasskärning m.m. - Varvsanvisningar [en sueco]
Safety directives for portable flame cutting and welding sets: handling and placing gas cylinders; installing gas pipes and distribution valves; taps, cocks, pressure-reducing valves, flash-back arresters; flexible hose; welding and cutting torches; prohibition on use of oxygen for certain kinds of work; precautions and inspections before work in enclosed spaces; flame scarfing; precautions to be taken in heating or cutting certain metals or coatings containing harmful substances; ventilation and monitoring of respirable air; fire protection; personal protective equipment. Models for gas cylinder labels are appended.
Liber Förlag, Fack, 16289 Vällingby, Sweden, 1975. 27p. Illus. Price: Swe-cr.7.50.
|
