ILO Home
Volver a la página de entrada
Site map | Contact us English | Français
view in a printer-friendly format »

Nanotechnology and nanoparticles - 102 entradas encontradas

Sus criterios de búsqueda son

  • Nanotechnology and nanoparticles

2009

CIS 08-1371 Kosk-Bienko J.
Workplace exposure to nanoparticles
This literature survey presents the latest knowledge concerning the risks of workplace exposure to nanoparticles. With the growing importance and more widespread use of nanoparticles in the economy, it is essential that as much be learned about their potentially harmful effects (and how to prevent them) as possible. In-vivo studies have shown inflammation, fibrosis and tumours induced by several granular nanomaterials in the lungs after respiratory exposure. Currently the mechanism of tumour formation is not fully understood and scientific uncertainties remain. No harmful effects of skin exposure have been shown so far. Protective measures that are typically used to protect against insoluble materials, like dusts, are usually recommended for nanomaterials as well. The effectiveness of current methods of respiratory protection is still to be investigated.
European Agency for Safety and Health at Work, Gran Vía 33, 48009 Bilbao, Spain, 2009. 89p. Illus. 341 ref.
http://osha.europa.eu/en/publications/literature_reviews/workplace_exposure_to_nanoparticles [en inglés]

2008

CIS 11-0088
Verband der Chemischen Industrie (VCI), Bundesanstalt für Arbeitsschutz und Arbeitsmedizin (BAuA)
Exposure to nanomaterials in Germany
This information sheet summarizes the main findings of a questionnaire survey conducted in Germany, addressed to 656 enterprises in the chemical industry; 217 responses were received (response rate 33%), Results presented in the form of graphs include: number of companies involved; volume of materials handled; number of exposed workers; exposure evaluations; information to clients; products involved; exposure measurements.
Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Friedrich-Henkel-Weg 1-25, 44149 Dortmund, Germany, 2008. 8p. Illus. 6 ref.
Exposure_to_nanomaterials.pdf [en inglés]

CIS 10-0689 Ostiguy C., Soucy B., Lapointe G., Woods C., Ménard L., Trottier M.
Health effects of nanoparticles - Second Edition
This report consists of a literature survey updating earlier reports on the health risks of nanotechnologies and on various aspects of industrial hygiene involving nanomaterials, considered necessary in view of the rapid advances in scientific knowledge.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail du Québec (IRSST), 505 boul. de Maisonneuve Ouest, Montreal (Quebec) H3A 3C2, Canada, 2nd ed., 2008. iii, 106p. Illus. Approx. 250 ref. Price: CAD 10.50. Downloadable version (PDF format) free of charge.
Report_R-589.pdf [en inglés]

CIS 09-1092 Rengasamy S., King W.P., Eimer B.C., Shaffer R.E.
Filtration performance of NIOSH-approved N95 and P100 filtering facepiece respirators against 4 to 30 nanometer-size nanoparticles
This study investigated the filtration performance of NIOSH-approved N95 and P100 filtering facepiece respirators against silver aerosol particles in the diameter range of 4-30nm. A test system was developed and standardized for measuring the penetration of the particles. Findings support previous studies that indicate NIOSH-approved respirators provide protection against nanoparticles.
Journal of Occupational and Environmental Hygiene, Sep. 2008, Vol.5, No.9, p.556-564. Illus. 29 ref.

CIS 09-622 Truchon G.
Nanoparticles and pulmonary effects
Nanoparticules et effets pulmonaires [en francés]
Little is known on the effects of human exposure to nanoparticles. However, there have been many studies on ultrafine particles, which are notably present in motor exhausts and urban pollution, but are also formed as undesirable side products in some industrial processes such as welding, thermal degradation and metal treatment. They cause cardiorespiratory effects among susceptible subjects. By analogy, one can expect that nanoparticles will cause similar effects.
Travail et santé, Dec. 2008, Vol.24, No.4, p.44-45. Illus.

CIS 09-387 Ostiguy C., Roberge B., Ménard L., Endo C.A.
Good practices guide to synthetic nanoparticle risk management
Guide de bonnes pratiques favorisant la gestion des risques reliés aux nanoparticules de synthèse [en francés]
This document is the first Québec guide on the management of risks related to synthetic nanoparticles. It proposes a prevention strategy applicable to workers and researchers who use or produce nanoparticles. Aimed at enterprises, researchers and safety and health specialists involved with nanotechnologies, this guide describes the current state of knowledge and proposes recommendations for promoting risk factor management and control for the purpose of occupational injury prevention. The guide identifies health, safety and environmental hazards, proposes a procedure for risk evaluation and control, documents current practices worldwide and specifies the content of a company prevention program.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail du Québec (IRSST), 505 boul. de Maisonneuve Ouest, Montreal (Quebec) H3A 3C2, Canada, 2008.vi, 63p. Illus. 13 ref. Price: CAD 8.40. Downloadable version (PDF format) free of charge.
http://www.irsst.qc.ca/files/documents/PubIRSST/R-586.pdf [en francés]

CIS 09-385 Gerdes A., Oehmischen D., Süssmuth J., Raunitschke D.
New strategies for the development of preventive surface protection measures
Neue Strategien für die Entwicklung präventiver Oberflächeschutzmassnahmen [en alemán]
Following a historical review of protective coatings in construction from ancient times until today, new systems, based on nanotechnology, which create a hydrophobic barrier on concrete are presented. Such coatings, mainly based on silanes, prevent pollutants from penetrating the concrete and attacking its surface.
Tiefbau, Oct. 2008, Vol.120, No.10, p.621-630. Illus. 22 ref.

CIS 09-383 Seillan H., Brochard P., Narbonne J.F., Léca N., Martin D.
Nanomaterials - A new type of danger?
Nanomatériaux - Un nouveau type de danger? [en francés]
Topics reviewed in this collection of articles on hazards resulting from occupational exposure to nanomaterials: hazards and toxicity related to particle size; need to develop protocols for toxicity testing; inclusion of nanomaterials within the scope of the REACH (registration, evaluation and authorization of chemicals) regulations; practical questions raised by the industrial development of nanomaterials.
Préventique-Sécurité, Sep.-Oct. 2008, No.101, p.13-29. Illus. 4 ref.

CIS 09-110 Nasterlack M., Zober A., Oberlinner C.
Considerations on occupational medical surveillance in employees handling nanoparticles
This study compared established concepts for the development of occupational medical surveillance programmes with existing knowledge on exposures in workplaces and on health effects of nanomaterials. A variety of potential effect parameters have been proposed for medical surveillance of exposed personnel, such as heart rate variability, blood-clotting and pro-inflammatory cytokines. However, none of these parameters are specific, most are not validated as individual health risk indicators and some require sophisticated equipment not routinely available. Against this background, a large German chemical company currently emphasizes the control of workplace exposure. Particle emissions are primarily avoided by manufacturing in closed systems or using effective extraction systems. Appropriate personal protective equipment is specified for such operations where potential exposure cannot be excluded.
International Archives of Occupational and Environmental Health, May 2008, Vol.81, No.6, p.721-726. 32 ref.

CIS 09-111 Schulte P.A., Trout D., Zumwalde R.D., Kuempel E., Geraci C.L., Castranova V., Mundt D.J., Mundt K.A., Halperin W.E.
Options for occupational health surveillance of workers potentially exposed to engineered nanoparticles: State of the science
Health authorities, employers and worker representatives are increasingly faced with making decisions about occupational health surveillance of workers potentially exposed to engineered nanoparticles. This article identifies options that can be considered. The published scientific literature on health effects from engineered and incidental nanoparticles and the principles of occupational health surveillance were reviewed to describe possible options and the evidence base for them. The options ranged from no action targeted to nanotechnology workers to an approach that includes documentation of the presence of engineered nanoparticles, identification of potentially exposed workers, and general and targeted medical testing.
Journal of Occupational and Environmental Medicine, May 2008, Vol.50, No.5, p.517-526. Illus. 91 ref.

CIS 09-109 Schulte P., Geraci C., Zumwalde R., Hoover M., Kuempel E.
Occupational risk management of engineered nanoparticles
The earliest and most extensive societal exposures to engineered nanoparticles are likely to occur in the workplace. This article reviews a conceptual framework for occupational risk management as applied to engineered nanomaterials and describes an associated approach for controlling exposures in the presence of uncertainty. The framework takes into account the potential routes of exposure and factors that may influence the biological activity and potential toxicity of nanomaterials. It incorporates approaches based on the traditional industrial hygiene hierarchy of controls involving elimination or substitution, engineering controls, administrative controls, and use of personal protective equipment. It also includes secondary approaches involving medical surveillance.
Journal of Occupational and Environmental Hygiene, Apr. 2008, Vol.5, No.4, p.239-249. Illus. 71 ref.

CIS 08-1367 Truchon G., Noël A., Cloutier Y., Maghni K., Gautrin D., Hallé S., Dufresne L., Dolez P., Tardif R.
Nanotechnology research - Where to start?
La recherche en nanotechnologie - Par où commencer? [en francés]
Today, the province of Quebec has established a leading position in Canada in the field of nanotechnology. Given the growing importance of this emerging field, this article presents an overview of the main researchers, enterprises and workers involved in Quebec.
Travail et santé, June 2008, Vol. 24, No.2, p.32-35. 15 ref.

CIS 08-1373 NIOSH nanotechnology metal oxide particle exposure assessment study
This information sheet announces a NIOSH research programme on exposure to metal oxide nanomaterials. It describes the background, objectives, conditions for participation and benefits to participating companies. NIOSH researchers will visit the facilities of each participant to carry out personal sampling of exposure to nanoparticular metal oxides. The data collected will be used to determine the extent to which metal oxide exposure is occurring in the nanotechnology industry.
Publications Dissemination, National Institute for Occupational Safety and Health (NIOSH), 4676 Columbia Parkway, Cincinnati, OH 45226-2001, USA, Mar. 2008. 4p. Illus.
http://www.cdc.gov/niosh/docs/2008-122/pdfs/2008-122.pdf [en inglés]

CIS 08-1370 Ostiguy C., Soucy B., Lapointe G., Woods C., Ménard L.
Health effects of nanoparticles - 2nd edition (April 2008)
Les effets sur la santé reliés aux nanoparticules - 2e édition (avril 2008) [en francés]
An earlier literature survey on nanoparticles led to the publication by IRSST of two reports in early 2006, one on the health hazards of nanotechnologies (CIS 06-1147) and the other on various aspects of industrial hygiene applicable to these technologies. However, in view of the rapid scientific advances in this field, an update was needed. This report consists of a comprehensive review of the literature published until the end of 2006 on health hazards, industrial hygiene and means of controlling the exposure to nanoparticles in the workplace.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail du Québec (IRSST), 505 boul. de Maisonneuve Ouest, Montreal (Quebec) H3A 3C2, Canada, 2008. iii, 112p. Illus. Approx. 350 ref. Price: CAD 10.50. Downloadable version (PDF format) free of charge.
http://www.irsst.qc.ca/files/documents/PubIRSST/R-558.pdf [en francés]

CIS 08-1107 Murashov V., Howard J.
The US must help set international standards for nanotechnology
A call for action by two prominent experts on the safety and health issues of nanotechnology. It is strongly urged that US government agencies and the private sector become more involved in international efforts to establish safety standards in the use of nanotechnology, and that all efforts for such standardization be based on sound science. The article reviews a current categorization effort for the hazards of nanotechnology, Safety Guide TC 229 published by the British Standards Institute (BSI), which proposes four hazard categories: fibrous; CMAR (those already classified as carcinogenic, mutagenic, asthmagenic or reproductive toxicants); insoluble; soluble. The letter to the editor by P. Hatto and the rejoinder by the authors debate the actual state of knowledge and the basis behind the TC 229 document, which is not in fact a full British Standard.
Nature Nanotechnology, Nov. 2008, Vol.3, p.635-636. Illus. 14 ref. Includes a letter to the editor ("International standards for risk management in nanotechnology"), by Hatto P., and a rejoinder by the original authors, published in the Apr. 2009 (Vol.4) of the same journal (p.205-206).

CIS 08-1119 NIOSH, nanotechnology, and occupational safety and health research - Frequently asked questions
Answers to frequently-asked questions on nanotechnology and nanomaterials, including production, uses, NIOSH research, number of workers exposed, effects on health, exposure evaluation, exposure tests and sources of additional information.
Publications Dissemination, National Institute for Occupational Safety and Health (NIOSH), 4676 Columbia Parkway, Cincinnati, OH 45226-2001, USA, May 2008. HTML document.
http://www.cdc.gov/niosh/topics/nanotech/faq.html [en inglés]

CIS 08-1011 Nanotechnology: Transportation into a new universe
Nanotecnologia: O transporte para um novo universo [en portugués]
A survey of the possible hazards of nanotechnology for workers, presented in very simple language in cartoon format.
Fundacentro, Rua Capote Valente, 710, São Paulo SP, 05409-002, Brazil, 2008. 20p. Illus.
http://www.fundacentro.gov.br/ARQUIVOS/PUBLICACAO/l/HQ1_nanotecnologia.pdf [en portugués]

CIS 08-893 Ricaud M., Lafon D., Roos F.
Carbon nanotubes: What are the hazards, and how can we prevent them?
Les nanotubes de carbone: quels risques, quelle prévention? [en francés]
Few studies have been published on the risks of carbon nanotubes to human health. However, given the excitement generated by this new class of chemicals, the number of exposed workers is likely to increase strongly in the coming years. This article on carbon nanotubes discusses current understanding with respect to their properties, applications and toxicology, as well as the preventive measures to adopt during their handling. Pending a better understanding of occupational exposures and risks to human health, it is recommended that the precautionary principle be applied, namely that exposure levels be kept as low as possible.
Cahiers de notes documentaires - Hygiène et sécurité du travail, Mar. 2008, No.210, p.43-57. Illus. 39 ref.

CIS 08-776 Safe nanotechnology in the workplace - An introduction for employers, managers, and safety and health professionals
Nanotechnology is the engineering and manipulation of materials at the molecular level. This new technology creates materials with dimensions ranging from 1 to 100 nanometers. Particles created at the nanoscale have different chemical and physical properties than larger particles of the same material. Scientists and manufacturers can use nanoparticles to create new products that would be impossible with larger particles. This booklet addresses the following issues with respect to nanotechnology: hazards of nanoparticles to workers; exposure of workers to nanoparticles; sampling and analysis of nanoparticles; control of workers' exposure.
Publications Dissemination, National Institute for Occupational Safety and Health (NIOSH), 4676 Columbia Parkway, Cincinnati, OH 45226-2001, USA, Feb. 2008. 2p. Illus. 3 ref.
http://www.cdc.gov/niosh/docs/2008-112/pdfs/2008-112.pdf [en inglés]

2007

CIS 11-0089
Verband der Chemischen Industrie (VCI), Bundesanstalt für Arbeitsschutz und Arbeitsmedizin (BAuA)
Guidance for handling and use of nanomaterials at the workplace
This guidance on the handling and use of nanomaterials at the workplace is based on the responses received to the survey on exposures to nanomaterials in Germany (see ISN 111408). Contents: production processes; general occupational safety and health rules; recommendations for workers' protection in the handling and use of nanomaterials; current situation and development of measuring methods for nanoparticles.
Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Friedrich-Henkel-Weg 1-25, 44149 Dortmund, Germany, 2007. 12p. Illus.
Guidance_for_handling.pdf [en inglés]

CIS 09-874 Harford A., Edwards J., Briestly B., Wright P.
Current OSH best practices for the Australian nanotechnology industry: A position paper by the NanoSafe Australia Network
Advancement of the nanotechnology industry in Australia has seen numerous researchers beginning to handle nanomaterials, as well as the establishment of industrial facilities that are producing nanomaterials for incorporation into consumer products. Traditionally, the risk assessment of chemicals relies heavily on their composition, whereas the key determinants in the adverse effects caused by nanomaterials are their physical parameters (particle size, surface area and surface chemistry). At the present time, workplace exposure standards are not available, and appropriate methods that accurately characterise exposure to nanomaterials have not been established. Exposure of workers should therefore be "as low as reasonably practicable" through risk management programs that broadly encompass all of the hierarchy of controls used for ultrafine particulates, namely appropriate engineering controls, administrative controls and personal protective equipment.
Journal of Occupational Health and Safety - Australia and New Zealand, Aug. 2007, Vol.23, No.4, p.315-331. 51 ref.

CIS 09-388 Hervé-Bazin B.
Nanoparticles - A major occupational health challenge?
Les nanoparticules - Un enjeu majeur pour la santé au travail? [en francés]
Nanoparticles are objects of less than 100 nanometres in size but whose source and use are very diverse. Because of their high rate of development, the absence of sufficient specific regulations and the lack of knowledge concerning their human toxicity, they are the cause of anxiety against risks that appear new, or which are in any case insufficiently understood. The objective of this publication is to present the current state of scientific knowledge on nanoparticles for enabling advances in research, public health and industrial hygiene. Contents: general aspects; characteristics and sources of these aerosols; routes of entry; environmental toxicological data; specific examples (simple or complex oxides, carbon-based particles).
EDP Sciences, 17 avenue du Hoggar, Parc d'Activité de Courtabœuf, BP 112, 91944 Les Ulis Cedex A, France, 2007. 701p. Illus. Bibl.ref. Price: EUR 54.00.

CIS 09-406 Monteiller C., Tran L., MacNee W., Faux S., Jones A., Miller B., Donaldson K.
The pro-inflammatory effects of low-toxicity low-solubility particles, nanoparticles and fine particles, on epithelial cells in vitro: The role of surface area
Mass might not be the appropriate metric for regulating exposures to low-solubility low-toxicity particles (LSLTPs) as animal studies have shown that nanoparticles produce a stronger adverse effect than fine particles when delivered on an equal mass basis. This study investigated whether the surface area is a better descriptor than mass of LSLTP of their ability to stimulate pro-inflammatory responses in vitro. In assays on a human alveolar type II-like cell line, nanoparticle preparations produced much stronger inflammatory responses than the same mass of fine particles of the same chemical composition. Oxidative stress was involved in the response to all the particles. Dose-response relationships appeared to be directly comparable with those found in vivo. These findings show that surface area is a more appropriate dose metric than mass for the pro-inflammatory effects of LSLTP and that the high surface area of nanoparticles is a key factor in their inflammogenicity.
Occupational and Environmental Medicine, Sep. 2007, Vol.64, No.9, p.609-615. Illus. 47 ref.

CIS 08-1118 Progress toward safe nanotechnology in the workplace
This document is a report of the progress of the NIOSH Nanotechnology Research Center (NTRC) since its inception in 2004 through 2006. Specific chapters address NTRC research contributions in the following areas: toxicology; hazard evaluation; epidemiology and surveillance; engineering controls and personal protective equipment; fire and explosion safety; safe working methods; information and training; applications.
Publications Dissemination, National Institute for Occupational Safety and Health (NIOSH), 4676 Columbia Parkway, Cincinnati, OH 45226-2001, USA, June 2007. xvii, 177p. Illus. Bibl.ref.
http://www.cdc.gov/niosh/docs/2007-123/pdfs/2007-123.pdf [en inglés]

CIS 08-639 Ostiguy C.
Nanotechnology - The next industrial revolution
Nanotechnologie - Vers la prochaine révolution industrielle [en francés]
Topics addressed in this review article on nanoparticles and nanotechnologies: definitions; research and development; examples of nanoparticles (carbon fullerenes and nanotubes, cadmium selenide, titanium dioxide, iron oxide); health hazards (toxicity related to particle size, capability of nanoparticles to migrate within the body); protective measures and limitation of exposure.
Travail et santé, Dec. 2007, Vol.23, No.4, p.10-15. Illus. 3 ref.

CIS 08-638 Honnert B., Vincent R.
Production and industrial use of nanostructured particles
Production et utilisation industrielle des particules nanostructurées [en francés]
This article describes the current situation with respect to nanoparticles that are currently produced on an industrial scale as well as those likely to face important industrial developments, namely titanium dioxide, carbon black, amorphous silica and various forms of alumina. It also discusses nanoparticles of secondary importance in terms of quantities (rare earths) or emerging products such as carbon nanotubes and nanoclays. For all these categories of products, a quantitative assessment is provided on the number of workers likely to be exposed during production operations, together with indications of the potential areas of use.
Cahiers de notes documentaires - Hygiène et sécurité du travail, 4th Quarter 2007, No.209, p.5-21. Illus. 20 ref.
http://www.hst.fr/inrs-pub/inrs01.nsf/IntranetObject-accesParReference/ND%202277/$File/ND2277.pdf [en francés]

CIS 08-373 Nanomaterials
Les nanomatériaux [en francés]
This safety guide on nanomaterials insists on the importance of critically assessing the hazards involved during occupational exposures. Even if it is too early to provide final answers, it is necessary to pool knowledge with respect to health hazards, metrology and workers' protection. While waiting for further progress in scientific knowledge, it is recommended to apply the precautionary principle and to limit exposures to the lowest level possible.
Institut national de recherche et de sécurité, 30 rue Olivier-Noyer, 75680 Paris Cedex 14, France, Mar. 2007. HTML file. Illus. 27 ref.
http://www.inrs.fr/INRS-PUB/inrs01.nsf/inrs01_catalog_view_view/4428D7E01036FEC9C125729F003445E9/$FILE/visu.html?OpenElement [en francés]

CIS 08-371 Bianchi P.
Nanotechnologies: New hazards?
Nanotechnologies: des nouveaux risques? [en francés]
Topics addressed in this review article on the toxicity of nanoparticles: description; level of spending in nanotechnology research; findings of a few in vitro and in vivo studies on toxicity and health hazards; precautionary measures (limitation of exposure, confinement, collective and personal protection, waste disposal, information of personnel); French and European regulations.
Face au risque, June-July 2007, No.434, p.11-14. Illus.

CIS 07-1363 Birraux C., Revol H.
Informe de la audiencia pública de 7 de noviembre de 2006 sobre las nanotecnologías: riesgos potenciales, cuestiones éticas
Compte rendu de l'audition publique du 7 novembre 2006 sur les nanotechnologies: risques potentiels, enjeux éthiques [en francés]
La oficina parlamentaria francesa de evaluación de las políticas científicas y tecnológicas ha organizado, el día 7 de noviembre de 2006, una audiencia pública sobre los riesgos potenciales y las cuestiones éticas de las nanotecnologías. La audiencia llevó a una reflexión sobre las especificidades de las nanotecnologías, sobre las posturas involucradas y los progresos que pueden aportar en los sectores de la salud, el medio ambiente, los transportes y la seguridad
La Documentation française, 29 quai Voltaire 75007 Paris, France, 2007. Internet document (pdf format), 137p. Free of charge. Cost of print version: EUR 5.00.
http://www.assemblee-nationale.fr/12/pdf/rap-off/i3658.pdf [en francés]

2006

CIS 12-0254 Florini K., Walsh S., Balbus J.M., Denson R.
Nanotechnology: Getting it right the first time
This literature survey on nanotechnology consists of a critical review of the current United States regulatory framework for the protection of workers and the general population, judged insufficient. It argues in favour of precautionary principles and voluntary standards by industry, as well as increased government funding for research aimed at assessing the human health and environmental implications of nanotechnology.
Sustainable Development Law & Policy. Spring 2006, p.46-53. 17 ref.
Nanotechnology_[INTERNET_FREE_ACCESS] [en inglés]

CIS 12-0244 Sass J., Simms S., Negin E.
Nanotechnologies: The promise and the peril
Topics addressed in this review article on nanotechnologies: current lack of data on toxicity and health hazards; insufficient government funding in the United States for safety and health research; role of private enterprise; recommendations of the Environmental Protection Agency; responses by public interest groups.
2006, Vol.VI, No.3, p.11-14, 74. 32 ref.
Nanotechnologies_[INTERNET_FREE_ACCESS] [en inglés]

CIS 09-389 Approaches to safe nanotechnology: An information exchange with NIOSH
This document reviews what is currently known about nanoparticle toxicity and control. It serves as a request from NIOSH to occupational safety and health practitioners, researchers, manufacturers, employers, workers, interest group members, and the general public to exchange information that will ensure that no worker suffers material impairment of safety or health as nanotechnology develops. Contents include potential health concerns, potential safety hazards, guidelines for working with engineered nanomaterials, exposure assessment and exposure control. Opportunities to provide feedback and information are available throughout the document.
Publications Dissemination, National Institute for Occupational Safety and Health (NIOSH), 4676 Columbia Parkway, Cincinnati, OH 45226-2001, USA, July 2006. xiii, 43p. Approx. 200 ref.
http://www.cdc.gov/niosh/topics/nanotech/safenano/pdfs/approaches_to_safe_nanotechnology.pdf [en inglés]

CIS 08-1116 Wake D.
Health and Safety Executive
The assessment of different metrics of the concentration of nano (ultrafine) particles in existing and new industries
This report describes work carried out in order to determine which metric for very small particles best relates the exposure measurement to health hazards. An experimental rig was constructed in which it was possible to measure concentrations of ultrafine particles of varying chemical composition and particle shape. The relationships between the mass, count and active surface area of these particles, and how they are affected by chemical composition and morphology were investigated. Findings are discussed. No simple relationship was found for predicting active surface area and mass from the results of size and number measurements. The findings indicate that it is unlikely that nanoparticles will be present in a working environment in an unattached state.
HSE Books, P.O. Box 1999, Sudbury, Suffolk CO10 2WA, United Kingdom, 2006. vi, 72p. Illus. 30 ref.
http://www.hse.gov.uk/research/rrpdf/rr513.pdf [en inglés]

CIS 08-370 de Cózar Escalante J.M.
Riesgos profesionales de las nanotecnologías
This article reviews the safety and health hazards related to nanotechnologies. Contents: characteristics of nanotechnologies; potential occupational hazards; toxicity and carcinogenic effects; explosion hazards; nanotechnology hazard evaluation and risk management; recommendations with respect to risk prevention.
Prevención, Oct.-Dec. 2006, No.178, p.6-17. Illus. 12 ref.

CIS 07-1104 Whatmore R.W., Aitken R.J., Chaudhry M.Q., Boxall A.B.A., Hull M., Garnett M.C., Kallinteri P., Seaton A.
Nanotecnología: Estudio en profundidad
Nanotechnology: In-depth review [en inglés]
Conjunto de cuatro artículos dedicados a los riesgos profesionales para la salud relacionados con las nanopartículas y las nanotecnologías, que tratan de los siguientes aspectos: I. La nanotecnología, ¿qué es? ¿debería inquietarnos? (por Whatmore R,W,) (aspectos teóricos y tendencias actuales); II. Fabricación y utilización de los nanomateriales: situación actual en el Reino Unido y tendencias mundiales (por Aitken R.J., Chaudry M.Q., Boxall A.B.A. y Hall M.); III. Nanomedicamentos y nanotoxicología: algunos ejemplos fisiológicos (por Garnett M.C. y Kallinteri P.); IV. Nanotecnología y medicina del trabajo (por Seaton A.)
Occupational Medicine, Aug. 2006, Vol.56, p.295-316. Illus. Bibl.ref.

CIS 07-852 Ostiguy C., Lapointe G., Ménard L., Cloutier Y., Trottier M., Boutin M., Antoun M., Normand C.
Las nanopartículas: conocimientos actuales sobre sus riesgos y las medidas de prevención en salud y seguridad del trabajo
Nanoparticles - Actual knowledge about occupational health and safety risks and prevention measures [en inglés]
Esta revisión evalúa los conocimientos científicos actuales respecto de las nanopartículas, centrándose especialmente en los riesgos para la salud y en los medios de prevención de la exposición de los trabajadores. Un primer informe sobre los efectos sobre la salud (ver CIS 06-1147) demuestra que existe un número limitado de estudios toxicológicos, aunque todos confirman la existencia de riesgos para la salud en relación con la exposición a las nanopartículas. Aunque hay muchos riesgos asociados a la naturaleza de la nanopartícula, está claramente establecido que su toxicidad esta relacionada con la superficie de estas partículas y no con su masa y que, para una misma sustancia, la toxicidad es marcadamente más elevada cuando la partícula es de dimensiones nanométricas que cuando tiene dimensiones micrométricas. El segundo informe trata de la caracterización, la producción, la utilización y la detección de las nanopartículas, y de los riesgos para la seguridad y la salud, así como de la limitación de la exposición y la prevención de los riesgos de incendio y explosión
Institut de recherche Robert-Sauvé en santé et en sécurité du travail du Québec (IRSST), 505 boul. de Maisonneuve Ouest, Montreal (Quebec) H3A 3C2, Canada, 2006. ix, 86p. Illus. Approx 200 ref. Price: CAD 10.60. Downloadable version (PDF format) free of charge.
http://www.irsst.qc.ca/files/documents/PubIRSST/R-470.pdf [en inglés]

CIS 07-364 Ostiguy C., Lapointe G., Tottier M., Ménard L., Cloutier Y., Boutin M., Antoun M., Normand C.
Efectos de las nanopartículas sobre la salud
Health effects of nanoparticles [en inglés]
En Québec se llevan a cabo numerosas investigaciones en el campo de las nanopartículas y tecnologías afines. En este sentido, existen ya o están en fase de implantación más de 35 empresas de producción. Se estima que la cifra de trabajadores potencialmente expuestos experimentará un crecimiento en los próximos cinco años. Para prevenir el desarrollo de enfermedades profesionales o la aparición de accidentes, el IRSST ha iniciado una revisión de datos científicos con el fin de evaluar si existen riesgos conocidos en relación con este sector emergente. Este informe resume los conocimientos actuales sobre toxicocinética y sobre los efectos para la salud dependiendo de la vía de exposición a diversos tipos de nanopartículas como fullerenos, nanotubos de carbono, nanopartículas orgánicas e inorgánicas, nanocápsulas, nanoesferas, y puntos cuánticos.
Institut de recherche Robert Sauvé en santé et en sécurité du travail (IRSST), 505 boul. de Maisonneuve Ouest, Montreal (Quebec) H3A 3C2, Canada, 2006. iv, 53p. Illus. 144 ref. Price: CAD 7.42. Downloadable version (PDF format) free of charge.
http://www.irsst.qc.ca/files/documents/PubIRSST/R-469.pdf [en inglés]

CIS 06-1394 Revisión de las posibles repercusiones de las nanotecnologías sobre la seguridad y la salud en el trabajo.
A review of the potential occupational health and safety implications of nanotechnology [en inglés]
Esta revisión de conjunto examina las preocupaciones en el campo de la seguridad y la salud en el trabajo que la nueva industria de las nanotecnologías suscita en Australia. Trata especialmente de los factores de exposición humana y la toxicología de las nanopartículas producidas con fines comerciales o de investigación.
Australian Safety and Compensation Council, info@ascc.gov.au, July 2006. 80p. Illus. 190 ref.
http://www.ascc.gov.au/NR/rdonlyres/D31285DE-EDDF-4DA8-9A24-550E05D86971/0/ASCC_ReviewOHSimplicationsofNanotechnology.pdf [en inglés]

CIS 06-1148 Ostiguy C., Lapointe G., Ménard L., Cloutier Y., Trottier M., Boutin M., Antoun M., Normand C.
Las nanopartículas: conocimiento actual sobre los riesgos y las medidas preventivas en seguridad y salud del trabajo.
Les nanoparticules: connaissances actuelles sur les risques et les mesures de prévention en santé et en sécurité du travail [en francés]
En Québec, la investigación en el campo del desarrollo de nanopartículas y de la nanotecnología es muy activa. Ya estan implantadas o en fase de implantación más de 35 empresas de producción. Se cree que el número de trabajadores quebequenses potencialmente expuestos aumentará en el curso de los próximos años. Con el fin de prevenir el desarrollo de enfermedades profesionales o la producción de accidentes, el IRSST ha comenzado a revisar los conocimientos científicos mundiales para evaluar si existen riesgos conocidos asociados a este sector emergente. El presente estudio es un informe de los conocimientos actuales sobre las nanopartículas, su síntesis y sus aplicaciones, y los riesgos que representan para la salud y la seguridad, y los retos que plantea la evaluación de la exposición profesional. También se comentan aspectos del control de la seguridad y la salud en el trabajo, y de la prevención, asociados a las nanopartículas.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST), 505 boul. de Maisonneuve Ouest, Montreal (Quebec) H3A 3C2, Canada, 2006. vii, 79p. Illus. Approx. 250 ref. Price: CAD 8.56. Downloadable version (pdf format) free of charge.
http://www.irsst.qc.ca/files/documents/PubIRSST/R-455.pdf [en francés]

CIS 06-1147 Ostiguy C., Lapointe G., Trottier M., Ménard L., Cloutier Y., Boutin M., Antoun M., Normand C.
Efectos para la salud derivados de las nanopartículas.
Les effets à la santé reliés aux nanoparticules [en francés]
Se piensa que el número de trabajadores quebequenses potencialmente expuestos aumentara en el curso de los próximos años. Este estudio bibliográfico trata de los efectos sobre la salud asociados a este sector emergente. Se ha visto que a pesar del numero limitado de estudios toxicológicos, todos ellos concluyen en ciertos riesgos para la salud como consecuencia de la exposición a las nanopartículas. Aunque se ha demostrado que existen diversos riesgos asociados a la naturaleza de las nanopartículas, se sabe con seguridad que la toxicidad esta vinculada a la superficie de tales partículas y no a su masa y que, para una misma sustancia, la toxicidad es mucho más elevada cuando la dimensión de la partícula es del orden nanométrico y no del orden micrométrico. Ver también CIS 06-1148.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST), 505 boul. de Maisonneuve Ouest, Montreal (Quebec) H3A 3C2, Canada, 2006. iii, 48p. Illus. 143 ref. Price: CAD 7.49. Downloadable version (pdf format) free of charge.
http://www.irsst.qc.ca/files/documents/PubIRSST/R-451.pdf [en francés]

2005

CIS 06-607 Mongalvy M.
Nanomundo: la nueva frontera de la prevención.
Nanomonde: la nouvelle frontière de la prévention [en francés]
Conjunto de artículos sobre la prevención en el campo de las nanotecnologías, en forma de entrevistas a representantes de un parque de investigación en nanotecnologías, el INRS, el Instituto para la Protección Radiológica y la Seguridad Nuclear, una empresa industrial y un centro de investigación de Estados Unidos.
Réalité Prévention, Oct. 2005, No.9, 8p (whole issue). Illus. 2 ref.

CIS 05-606 Beasseur G., Witschger O., Delmotte H.
Partículas ultrafinas - El nanodesarrollo bajo vigilancia.
Particules ultrafines - Le nanodéveloppement sous surveillance [en francés]
Este dosier trata de los riesgos profesionales que afectan a los trabajadores de este sector de la nanotecnología. La principal vía de absorción es la inhalatoria, aunque pueden existir riesgos de absorción percutánea y de ingestión. En el sumario: aerosoles ultrafinos y riesgos potenciales; prevención a través de la información; seguridad en el laboratorio durante la elaboración de nanopolvos; vigilancia durante las actividades de investigación en laboratorio.
Travail et sécurité, June 2005, No.652, p.26-36. Illus. 2 ref.

CIS 05-605 Witschger O., Fabriès J.F.
Partículas ultrafinas y salud laboral - 2. Fuentes y caracterización de la exposición.
Particules ultra-fines et santé au travail - 2. Sources et caractérisation de l'exposition [en francés]
Como continuación al artículo referenciado en CIS 05-604, que trata de las principales características de las partículas ultrafinas así como de sus interacciones y potenciales efectos sobre la salud, este artículo trata de describir las fuentes de partículas ultrafinas en los ambientes laborales. Examina las fuentes en el campo de las tecnologías convencionales y de las nanotecnologías, y describe las técnicas para la caracterización de la exposición profesional a partículas ultrafinas: estrategia, metrología y medición de la concentración en número, en superficie y en masa, en el aire.
Cahiers de notes documentaires - Hygiène et sécurité du travail, 2nd Quarter 2005, No.199, p.37-54. Illus. 120 ref.
http://www.inrs.fr/INRS-PUB/inrs01.nsf/inrs01_search_view_view/BC245F0741557B57C1257023004C3D2B/$FILE/nd2228.pdf [en francés]

CIS 05-604 Witschger O., Fabriès J.F.
Partículas ultrafinas y salud laboral - 1. Características y efectos potenciales sobre la salud.
Particules ultra-fines et santé au travail - 1. Caractéristiques et effets potentiels sur la santé [en francés]
Las partículas ultrafinas (nanopartículas) presentan importantes riesgos potenciales para la salud laboral. En el marco de este estudio bibliográfico, se han analizado aproximadamente 180 artículos científicos, informes o libros, de los que un 80% estaban publicados después del año 2000. Aspectos tratados: características de las partículas ultrafinas (naturaleza física, desplazamiento y transferencia en el aire y depósito sobre las superficies); filtrado del aire; consideraciones sobre una definición de los aerosoles ultrafinos; depósito en las vías respiratorias; efectos potenciales sobre la salud (estudios epidemiológicos y toxicología). La cuestión de la exposición profesional se trata en un segundo artículo (ver CIS 05-605).
Cahiers de notes documentaires - Hygiène et sécurité du travail, 2nd Quarter 2005, No.199, p.21-35. Illus. 75 ref.
http://www.inrs.fr/INRS-PUB/inrs01.nsf/inrs01_search_view_view/295A3A062618D325C1257023004C3B82/$FILE/nd2227.pdf [en francés]

CIS 05-620 Seillan H., Brochard P., Laurent L., Hervé-Bazin B.
Nanotecnologías y riesgos sanitarios.
Nanotechnologies and health hazards [en inglés]
Nanotechnologies et risques sanitaires [en francés]
Esta colección de artículos trata de los riesgos sanitarios derivados de las nanotecnologías. Por razón de su tamaño, de escala nanométrica, las nanopartículas (nanosferas o nanotubos) de carbono, dióxido de titanio o compuestos de otras sustancias, pueden interactuar con los tejidos vivos de forma diferente a como lo hacen las partículas de tamaño más grande. Se ha comprobado que los conocimientos relativos a estos riesgos están muy fragmentados, aunque el desarrollo y la comercialización de tales productos están muy avanzados. Existen argumentos que aconsejan incrementar los esfuerzos en materia de investigación toxicológica antes de poner en el mercado este tipo de sustancias.
Préventique-Sécurité, Mar.-Apr. 2005, No.80, p.4-16. Illus.

2004

CIS 07-1364
Health and Safety Executive
La nanotecnología
Nanotechnology [en inglés]
Esta nota informativa va destinada a las personas que participan en trabajos de investigación y desarrollo en el campo de las nanotecnologías. Preconiza prudencia en un campo en el que los riesgos, hasta el momento, son poco conocidos. En el sumario: descripción de la nanotecnología y los nanomateriales; evaluación del riesgo; legislación (COSHH, ver CIS 03-1023); incertidumbre científica; riesgos para la salud; potencial de exposición; medidas de control; equipos de protección individual; vigilancia médica; riesgos para la seguridad (efectos catalíticos, incendio y explosión); gestión (métodos de trabajo, formación, supervisión, información del personal)
HSE Books, P.O. Box 1999, Sudbury, Suffolk CO10 2WA, United Kingdom, 2004. 4p. 18 ref.
http://www.hse.gov.uk/pubns/hsin1.pdf [en inglés]

CIS 07-851 Nanociencia y nanotecnologías: oportunidades e incertidumbres
Nanoscience and nanotechnologies: Opportunities and uncertainties [en inglés]
Este informe sobre nanociencias y nanotecnologías remarcan las numerosas ventajas actuales y futuras que aportan, si bien es preciso un debate acerca de su desarrollo. También trata de la inmediata necesidad de investigación para desterrar las incertidumbres respecto de los efectos de las nanopartículas sobre la salud y el medio ambiente. Da recomendaciones para la reglamentación del control de la exposición a las nanopartículas. Temas tratados: definición de nanociencia y nanotecnología; investigación científica; fabricación y usos industriales; eventuales efectos nocivos y daños para el medio ambiente; aspectos sociales y éticos; debate público y diálogo entre los interlocutores sociales; aspectos reglamentarios; conclusiones; recomendaciones
The Royal Society, 6-9 Carlton House Terrace, London SW1Y 5AG, United Kingdom, 2004. Internet document. 113p. 147 ref.
http://www.nanotec.org.uk/finalReport.htm [en inglés]

CIS 07-850 Davies P., Tsavalos A., Fullam B., Wilson M.
Health and Safety Commission
Gestionando los riesgos de la nanotecnologías
Managing the risks from nanotechnology [en inglés]
Este documento de trabajo de la Health and Safety Commission sobre la nanotecnología destaca la naturaleza incierta de los riesgos para la salud relacionados con las nanopartículas e insiste en la necesidad de adoptar una actitud basada en el principio de precaución. Esboza un plan de acción que contiene propuestas de investigaciones prioritarias, así como el desarrollo de directivas tendentes a minimizar la exposición teniendo presente la incertidumbre
HSE Books, P.O.Box 1999, Sudbury, Suffolk CO10 2WA, United Kingdom, Mar. 2004. 4p.
http://www.hse.gov.uk/aboutus/HSC/meetings/2004/060404/c42.pdf [en inglés]

CIS 07-147 Borm P.J.A.
Toxicología de las partículas: de la extracción de carbón a las nanotecnologías.
Partikeltoxikologie: Vom Steinkohlenbergbau zur Nanotechnologie [en alemán]
La investigación en materia de toxicología de productos en forma de partículas está estrechamente relacionada con las actividades industriales y determinados materiales como el carbón, el amianto, la lana de vidrio y, más recientemente, los polvos en suspensión aérea. El estudio de los efectos de las partículas inhaladas no se limita a los pulmones. Actualmente se cree que las partículas pasan a la circulación y que las reacciones inflamatorias pulmonares dan lugar a efectos sistémicos. Con el desarrollo de las nanotecnologías, han aparecido nuevos materiales constituidos por partículas ultrafinas de los que todavía se desconocen sus efectos sobre la salud, aunque en este campo la exposición por inhalación se considere mínima. Los esfuerzos investigadores en materia de toxicología deberán centrarse en la actividad y los efectos biológicos de tales partículas ultrafinas así como en la influencia de su superficie y su tamaño sobre dichos efectos.
Zentralblatt für Arbeitsmedizin, Arbeitsschutz und Ergonomie, June 2004, Vol.54, No.6, p.188-197. Illus. 51 ref.

CIS 05-358 Hervé-Bazin B.
La necesidad de examinar los peligros asociados con las partículas ultra-finas
De la nécessité de faire un point sur les dangers des particules ultra-fines [en francés]
La aparición de nuevas tecnologías que usan o generan partículas ultra-finas o nanopartículas, plantea algunos interrogantes sobre los riesgos encontrados durante la exposición profesional. Aunque en este campo se podrían aplicar en cierta medida los conocimientos adquiridos en el área de medioambiente, no permiten sin embargo conocer por completo los posibles riesgos industriales. De ahí la necesidad de mejorar los datos toxicológicos e identificar los principales factores de riesgo. Es preciso, por tanto, mejorar las técnicas de medición o los estándares técnicos o sanitarios o la creación de nuevos métodos o estándares para garantizar unas condiciones de trabajo capaces de proteger la salud de las personas expuestas. La diversidad de aplicaciones realizadas y en proyecto en el campo de las partículas ultra-finas constituyen un nuevo desafío para conseguir que los actuales sistemas de seguridad y salud se adapten a los cambios tecnológicos.
Cahiers de notes documentaires - Hygiène et sécurité du travail, 4th Quarter 2004, No.197, p.53-60. 99 ref.
http://www.hst.fr/INRS-PUB/inrs01.nsf/inrs01_catalog_date1_view_view/73C049CB88E6F3ECC12570230049AEE2/$FILE/pr15.pdf [en francés]

CIS 04-422 Aitken R.J., Creely K.S., Tran C.L.
Health and Safety Executive
Nanopartículas: Revisión sobre higiene del trabajo
Nanoparticles: An occupational hygiene review [en inglés]
La nanotecnología es un área de investigación, desarrollo y actividad industrial interdisciplinar que ha experimentado un rápido crecimiento en la última década. Las nanopartículas son los productos finales de una extensa variedad de procesos físicos, químicos y biológicos. Este artículo revisa los siguientes aspectos de las nanopartículas: vías potenciales de exposición humana; fuentes industriales de exposición profesional; niveles de exposición; medios de control y su eficacia; estimación de personas expuestas; posibilidades de llenar el vacío en materia de conocimientos; tendencias en el uso potencial de la nanotecnología; opiniones sobre la probable repercusión de la transición entre investigación y utilización industrial a gran escala.
HSE Books, P.O. Box 1999, Sudbury, Suffolk CO10 2WA, United Kingdom, 2004. viii, 100p. Bibl.ref. Price: GBP 20.00. Downloadable version free of charge.
http://www.hse.gov.uk/research/rrpdf/rr274.pdf [en inglés]

< anterior | 1, 2, 3 | siguiente >