ILO Home
Volver a la página de entrada
Site map | Contact us English | Français

Base de datos CISDOC

ID (ISN) del documento55869
Número CIS 91-982
ISSN - Título de la serie 0736-2501 - Noise Control Engineering Journal
Año 1990
Número de serie
Autor(es) Wong C.J.
Título Timing belt noise of office machines
Información bibliográfica Nov.-Dec. 1990, Vol.35, No.3, p.103-112. Illus. 7 ref.
Resumen Drive systems, especially timing belts, are a major source of the noise produced by office machines such as copiers and printers. Most previous studies of belt drive noise have dealt only with manufacturing equipment. Here, the effects of belt pitch, belt materials, pulley materials, flange sizes, pulley sizes, shaft alignment, belt length, belt width, drive speed, torque and initial tension on noise generation were measured. In general, pulleys should be solid steel, large in diameter with narrow flanges, and precisely aligned. Belts should be made of neoprene, narrow, with fine pitch and minimum tension, and should be operated at minimum speed.
Descriptores (primarios) ruido; material de oficina; transmisiones por fricción
Descriptores (secundarios) impresión y reproducción; reproducción; diseno del material; lucha contra el ruido
Tipo de documento D - Artículos periódicos
País / Estado o ProvinciaEstados Unidos
Tema(s) Ruido, audición, vibraciones
Broad subject area(s) Riesgos físicos
Navegación por categoria(s) Office work
Noise