ID (ISN) del documento | 52700 |
Número CIS |
89-2020 |
Año |
1988 |
Número de serie |
Undersökningsrapport 1988:9
|
Autor(es) |
Kihlberg S., Friberg M., Hagberg M., Hansson J.E., Jorulf L., Östergen C.E. Arbetsmiljöinstitutet |
Título |
Vibration exposure and work posture during truck assembly |
Título original |
Vibrationsexponering och arbetsställningar vid montering av lastbilar [en sueco] |
Información bibliográfica |
Arbetarskyddsstyrelsen, Publikationsservice, 171 84 Solna, Sweden, 1988. 31p. Illus. 9 ref. |
Resumen |
Report on a study of the working conditions at one of the assembly lines in a factory of trucks in Gothenburg, Sweden. Heavy loads on the back, necks and arms caused by the work posture were reported. Work rotation and improvements in workplaces are proposed. A new instrument for measuring body postures was tested and found to function properly. The vibration exposure had been reduced by a factor of two by changing from impact wrenches to nut runners when possible. The frequency-weighted 4-hour equivalent value was 1m/s2. The mean level for the eight most exposed workers was 1.3m/s2. The risk of vibration injury was therefore judged to be low. The noise level was relatively high, depending on the high level of background music, 80-93dB(A). |
Descriptores (primarios) |
vibración; industria del automóvil; postura en el trabajo; trabajo en cadena |
Descriptores (secundarios) |
informe; ruido; estudio del trabajo; herramientas manuales; llaves inglesas; ergonomía |
Tipo de documento |
E - Libros, informes, actas |
Tema(s) |
Ruido, audición, vibraciones
|
Broad subject area(s) |
Riesgos físicos
|
Navegación por categoria(s) |
Motor vehicle manufacturing industry Vibration Work posture
|