ILO Home
Volver a la página de entrada
Site map | Contact us English | Français

Base de datos CISDOC

ID (ISN) del documento30260
Número CIS 78-1880
ISSN - Título de la serie 0005-3848 - Bänder, Bleche, Rohre
Año 1977
Número de serie
Autor(es) Dupuis B., Raschke H.D.
Título Reduction of noise during grinding of sheet metal and sheet metal structures
Título original Lärmminderung beim Schleifen von Blech und Blechkonstruktionen [en alemán]
Información bibliográfica 1977, No.6, p.272-276. Illus. 7 ref.
Resumen The composition of grinding noise depends on the type of drive, the tool and the workpiece. Possibilities of reducing noise by modifying work methods or use of an alternatve method are set out. Measures involving the workpiece include laying it on a solid support, use of permanent magnets, use of plastic matting and immersion in water. Measures involving the tool relate to: grain size and hardness of the wheel binder, modification of design incorporating absorbing layers (plastic-impregnated fibres). Analysis of possibilities of modifying high-speed drives, especially that of the fan wheel, are analysed. A large place is given to discussion of the machine and economic aspects.
Descriptores (primarios) trabajo manual con abrasivos; planchistería; atenuación del ruido; lucha contra el ruido
Descriptores (secundarios) dispositivos portapiezas; métodos de trabajo y seguridad; aspectos económicos; muelas abrasivas
Tipo de documento -
Tema(s) Ruido, audición, vibraciones
Broad subject area(s)
Navegación por categoria(s) Metalworking industry
Noise