Document ID (ISN) | 102194 |
CIS number |
03-1401 |
ISBN(s) |
2-551-21804-7 |
Year |
2003 |
Convention or series no. |
Etudes et recherches R-336
|
Author(s) |
Lan A., Daigle R., LeBoeuf D., Chaallal O. |
Title |
Validation of propping based on high-density polyethylene piping or on metallic profiles normally used for culverts or sewers |
Original title |
Validation d'un étançonnement fait d'un tuyau de polyéthylène haute densité ou de profilés métalliques normalement utilisés pour les ponceaux et les égouts [in French] |
Bibliographic information |
Institut de recherche en santé et en sécurité du travail du Québec (IRSST), 505 boul. de Maisonneuve Ouest, Montreal (Quebec) H3A 3C2, Canada, May 2003. x, 127p. Illus. 62 ref. Price: CAD 13.00. CD-ROM containing the PDF version of the document is included. |
Internet access |
http://www.irsst.qc.ca/htmfr/pdf_txt/R-336.pdf [in French]
|
Abstract |
The objective of this study was to validate the use of circular cross-section metallic or high density polyethylene profiles for propping during short-duration excavation work. This type of propping is easier and quicker to install than rigid panels and are better suited to reduced-diameter boring. Work involved measurements in the laboratory and at construction sites, together with mathematical simulations on the mechanical behaviour of pipes. It was concluded that this type of shoring is well suited provided one selects pipes having a minimum specified rigidity. |
Descriptors (primary) |
construction sites; propping; tunnelling; piping |
Descriptors (secondary) |
protection against landslides; polyethylene; steel supports; work in sewers; mathematical simulation; materials testing; report |
Document type |
E - Books, reports, proceedings |
Country / State or Province | Canada |
Subject(s) |
Construction industry
|
Broad subject area(s) |
Mechanical hazards, transport
|
Browse category(ies) |
Compressed gases and pressure vessels
|