Use water spray, powder, alcohol-resistant foam, carbon dioxide.
PREVENT GENERATION OF MISTS!
Rinse and then wash skin with water and soap.
Wear safety spectacles.
Rinse with plenty of water for several minutes (remove contact lenses if easily possible).
Do not eat, drink, or smoke during work.
CLASSIFICATION & LABELLING
Collect leaking and spilled liquid in covered containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
According to UN GHS Criteria
Transportation UN Classification
PHYSICAL & CHEMICAL INFORMATION
Physical State; Appearance OILY VISCOUS LIQUID.
Molecular mass: 421 (average)
Boiling point at 0.7kPa: 244-252°C Melting point: -43°C Relative density (water = 1): 0.98 Solubility in water, g/100ml at 20°C: <0.01 (very poor) Vapour pressure, Pa at 20°C: <0.01 Flash point: 221°C c.c. Auto-ignition temperature: 380°C Explosive limits, vol% in air: 0.4-2.9 Octanol/water partition coefficient as log Pow: 8.8 Viscosity: 77.6 mm²/s at 20°C
EXPOSURE & HEALTH EFFECTS
Routes of exposure The substance can be absorbed into the body by inhalation of its aerosol.
Effects of short-term exposure
Inhalation risk Evaporation at 20°C is negligible; a harmful concentration of airborne particles can, however, be reached quickly when dispersed.
Effects of long-term or repeated exposure Tumours have been detected in experimental animals but may not be relevant to humans.
OCCUPATIONAL EXPOSURE LIMITS
Other melting points: between -40°C and -46°C. The recommendations on this Card also apply to 1,2-Benzenecarboxylic acid, di-C8-10-branched alkyl esters, C9-rich (CAS 68515-48-0) (DINP 1 is a trade name).
All rights reserved. The published material is being distributed without warranty of any kind, either expressed or implied.
Neither ILO nor WHO nor the European Commission shall be responsible for the interpretation and use of the information contained in this material.