Remove contaminated clothes. Rinse and then wash skin with water and soap. Refer for medical attention . Wear protective gloves when administering first aid.
Wear safety goggles, face shield or eye protection in combination with breathing protection if powder.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Do not eat, drink, or smoke during work.
CLASSIFICATION & LABELLING
Do NOT let this chemical enter the environment. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations.
According to UN GHS Criteria
Transportation UN Classification
PHYSICAL & CHEMICAL INFORMATION
Physical State; Appearance YELLOW CRYSTALS.
Chemical dangers Decomposes on heating. This produces toxic fumes.
Molecular mass: 226.3
Melting point: 149°C Solubility in water: none Vapour pressure, Pa at 20°C: <10 Relative vapour density (air = 1): 7.8 Relative density of the vapour/air-mixture at 20°C (air = 1): 1.0 Octanol/water partition coefficient as log Pow: 7.23
EXPOSURE & HEALTH EFFECTS
Routes of exposure The substance can be absorbed into the body by inhalation of its aerosol and through the skin.
Effects of short-term exposure
Effects of long-term or repeated exposure See Notes.
OCCUPATIONAL EXPOSURE LIMITS
This substance may be hazardous to the environment. Special attention should be given to the total environment. Bioaccumulation of this chemical may occur in oils and fats.
Insufficient data are available on the effect of this substance on human health, therefore utmost care must be taken. See ICSCs 0720 and 721.
All rights reserved. The published material is being distributed without warranty of any kind, either expressed or implied.
Neither ILO nor WHO nor the European Commission shall be responsible for the interpretation and use of the information contained in this material.