ILO Home
Volver a la página de entrada
Site map | Contact us English | Français
view in a printer-friendly format »

Rail transportation - 2 entradas encontradas

Sus criterios de búsqueda son

  • País / Organización: Italia
  • Rail transportation

1974

CIS 75-239 Act No.191 of 26 April 1974 concerning the prevention of occupational accidents in services and plant managed by the State Autonomous Railway Company
Legge 26 aprile 1974, n.191 - Prevenzione degli infortuni sul lavoro nei servizi e negli impianti gestiti dall'Azienda autonoma delle ferrovie dello Stato [en italiano]
This Act lays down safety measures to be observed: (a) in service buildings (floor surfaces, passageways, pits, doors, emergency lighting); (b) in buildings near the permanent way: tracklayers' sheds, level-crossing watchmen's huts; (c) beside the permanent way (service pathways); (d) when work is being done on permanent way carrying traffic; (e) in tunnels (refuge-holes, safe work during track repairs, etc.); (f) in work on rolling stock (maintenance and repair, protection against live overhead contact lines); when operating service vehicles in stations (luggage, postal sacks, etc.); (h) in work on electric lines. The Act also makes provision for staff safety training, protection of buildings against outbreaks of fire, and inspection to ensure compliance with safety regulations.
Gazzetta ufficiale, 24 May 1974, Vol.115, No.134, p.3571-3575.

CIS 75-177
Ministry of Transport and Civil Aviation (Ministero dei trasporti e dell'aviazione civile), Roma.
Ministerial decree dated 14 January 1974 - Conditions for the transport of ethylene oxide
Decreto ministeriale 14 gennaio 1974 - Modalità di trasporto dell'ossido di etilene [en italiano]
Rail transport of liquid ethylene oxide which has not been inerted by nitrogen is prohibited. The partial pressure of the nitrogen in the containers used for transport should not fall below 5kg/cm2 or exceed 7kg/cm2 for an ambient temperature between 0 and 30°C. Empty containers which previously held ethylene oxide should be filled with nitrogen at the same pressure during transport. Testing pressure for these containers is fixed at 14kg/cm2; for welded containers up to 150l capacity testing pressure should be 19kg/cm2.
Gazzetta ufficiale, 30 Jan. 1974, Vol.115, No.28, p.699.